Product Information

E-Mail or call +44(0)1604 648344

Photo

ERMO482X Pro - Digital Microwave, up to 500m range

The ERMO482X Pro is a bi-static, digital microwave detector for high security, external applications, now with IP PoE capability.
It comprises a transmitter and receiver which, when mounted facing each other, create a protection zone, the dimensions of which vary according to the chosen antenna, the distance between the two units and the selected system sensitivity.

The ERMO482X Pro is also available with different ranges which are:

ERMO482X-50 - 50 metre range X Band

ERMO482X-80 - 80 metre range X Band

ERMO482X-120 - 120 metre range X Band

ERMO482X-200 - 200 metre range X Band

ERMO482X-250 - 250 metre range K Band

ERMO482X-500 - 500 metre range K Band

The ERMO482X takes full advantage of the latest digital processing technology and has numerous features designed to make it easy to install and maintain.

ERMO482X PRO monitors the received signal, comparing it with behaviour models using algorithms based on "Fuzzy Logic" to decide if the signal was created by a real intruder or some other factor. The size, shape and rate of change of the signal are continuously monitored and compared with typical stored models.

The sensor is able to detect intruders walking, running, crawling or rolling. Every event can be date and time stamped and stored in the on-board memory. The memory can be down-loaded locally or remotely to a PC and analysed to assess the possible causes.

The barriers have a 16 channel coding system to prevent interference and simplify any overlap requirements and built in alignment aids and commissioning tools reduce the need for additional set up meters or instruments.

One unique feature is that the width of the detection pattern can be reduced using the special FSTD (Fuzzy Side Target Discrimination) function that allows the ERMO482X Pro to be used in restricted environments. It also has a unique anti-masking facility that can detect specific forms of attack using low level screens to block the signal. In addition

A special software package, WAVETEST, is available which gives access to all the operating parameters for each barrier, as well as the internal memories. This allows the barriers to be addressed via a serial data link from a PC located at a remote position. The complete performance of each barrier can be monitored and adjusted via the PC, without the need to physically access the individual units.

Photo
Microwave Barrier Sensor

For full information download the datasheet

Photo
Approved for UK Government Use
for details contact CPNI
Photo
Microwave Barrier Sensor
Photo
With FSTD Setting
Photo
Without FSTD Setting

  • Dynamic Integration Control - To discriminate between small, fast targets, such as birds, and larger targets such as a running man.
  • Anti Masking Circuit - To detect attempts to slowly block part of the detection area.
    256 event cyclic event memory on board - To store all events such as alarms, pre-alarms and opening the cover etc.
  • 100 event cyclic analogue memory - To store up to 2.5 seconds of received signal (threshold triggered) for analysis.
  • RS485 serial port - For memory download, parameter setting, either local or remote, and multiplexing of alarm information for up to 24 barriers.

GPS Perimeter Systems +44 (0) 1604 648344

Copyright GPS Perimeter Systems 2007 • Site designed by ravecreative
 

admin access

Logon

english

CHIN001